Vandal Resistant Lighting

• 3mm or 5mm Polycarbonate Controller
• High Frequency Electronic gear
• Vandal Resistant Design
• Secure Anti-Ligature frame design
• Excellent Photometric performance

Cornice mounting fluorescent range of shallow vandal resistant luminaires designed for commercial, hospital and educational environments. The luminaire uses T5 high efficacy fluorescent tubes with high frequency electronic control gear.

The combination of mild steel bodies and frames ensures a tight fit, to help reduce the risk of ligature problems. Three compartment trunking system as standard provides ability to carry different services around the association areas thanks to dummy sections installed between fittings. The diffuser can be supplied with opal or prismatic 3mm or 5mm thick polycarbonate.

The geartray is made of white powder coated mild steel and is removable for ease of maintenance. The screws holding the frame are stainless steel high security Allen type with central pin as standard. The luminaires are designed for use in those areas where resilience is important and there are various options of light source available to enable a suitable balance between efficacy and effect to be achieved.

The full datasheet can be found here

• 3mm or 5mm Polycarbonate Controller
• High Frequency Electronic gear
• Vandal Resistant Design
• Secure Anti-Ligature frame design
• Excellent Photometric performance

Surface or recessed mounting fluorescent range of shallow vandal resistant luminaires designed for commercial, prison and educational environments.
The luminaire uses T5 high efficiency fluorescent tubes with high frequency electronic control gear. The combination of mild steel bodies and frames ensures a tight fit, to help reduce the risk of ligature problems. The diffuser can be supplied with opal or prismatic 3mm or 5mm thick polycarbonate.

The geartray is made of white powder coated mild steel and is removable for ease of maintenance. The screws holding the frame are stainless steel high security Allen type with central pin as standard. The luminaires are designed for use in those areas where resilience is important and there are various options of light source available to enable a suitable balance between efficacy and effect to be achieved.

Click here for full datasheet

Surface T5 Safe Cell Range – Designed and built for HMP Custodial Establishments

• 5mm KILLBURN fire & vandal resistant diffuser
• High Frequency Electronic gear
• Vandal Resistant Design
• Secure Anti-Ligature frame design
• Excellent Photometric performance

Surface fluorescent range of shallow vandal resistant luminaires designed for commercial, safe cell prison and educational environments. The luminaire uses T5 high efficiency fluorescent tubes with high frequency electronic control gear.

The combination of mild steel bodies and frames ensures a tight fit, to help reduce the risk of ligature problems. The KILLBURN diffuser supplied is 5mm thick, Tp(a) rated and has 30min fire rating. The geartray is made of white powder coated mild steel and is removable for ease of maintenance.

The screws holding the frame are stainless steel high security Torx type with central pin as standard. The luminaires are designed for use in those areas where resilience is important, and there are various options of light source available to enable a suitable balance between efficacy and illuminance to be achieved.

To view the full datasheet click here

Designed and built for HMP Custodial Establishments

• Indoor IP20 or Outdoor IP65 versions
• Integral Long Life Batteries
• Easy Installation
• Aesthetically Pleasing Profile
• Good Photometric Performance

A stylish range of integral emergency lighting units for wall mounting indoors and outdoors. The luminaire uses two 21W tungsten lamps in spotlight housings.

The body is made from powder coated mild steel for the IP20 version and polycarbonate for the IP65 type. The units are designed to provide required illuminance levels on perimeter escape routes of large open areas in industrial and commercial buildings.

To view the full datasheet click here

Designed and built for HMP Custodial Establishments

• Polycarbonate body
• High Purity Aluminium Reflector
• Removable geartray
• Good sideways distribution to maximise spacing
• Excellent Photometric performance

A range of wall mounted fittings for mounting heights in the order of 2 – 6m. The luminaire is manufactured from polycarbonate and is vandal resistant.

The reflector is made from anodised and brightened 99.85 aluminium. The wall packs are designed for use in amenity and security conscious areas where discretion and strength are important. There are various options of light source available to enable a suitable balance between efficacy and effect to be achieved. The fittings give good sideways distribution to obtain maximum spacing.

To view the full datasheet click here

Designed and built for HMP Custodial Establishments

• T5 lamp technology means high efficacy
• HF Electronic Control Gear
• Easy Installation

An attractive range of modular fluorescent IP65 fittings for general use. The luminaire uses T5 high efficacy lamps with high frequency electronic control gear.
The body is made from white powder coated mild steel with welded steel joints. They are suitable for use in many commercial applications, such as public areas and wet production areas.

The range is particularly used in areas where fittings are likely to undergo mild attacks from vandals. There are various sizes and lamp options available to suit the particular application.

To view full datasheet click here

• Slide-in polycarbonate controller
• High frequency electronic gear
• Secure anti-ligature design
• Excellent photometric performance

This is a range of ceiling-mounting T5 or T8 fluorescent vandal-resistant luminaires, designed for cell requirements in prisons and other secure environments. The luminaire uses T8 fluorescent tubes with high frequency electronic control gear. The combination of mild steel bodies and endcaps ensure a tight fit, to help reduce the risk of ligature problems.
The diffuser can be supplied with opal or prismatic 3mm thick polycarbonate. The geartray is made of white powder coated mild steel and is removable for ease of maintenance. The screws holding the endcaps are stainless steel high security Allen type with central pin as standard. The diffuser slides in from one end to maintain the resistance to attack.

To view the full data sheet click here

• 3mm or 5mm polycarbonate controller
• High frequency electronic gear
• Vandal resistant design
• Secure anti-ligature frame design
• Excellent photometric performance

These vandal-resistant luminaires are designed for use in areas where resilience is important, and there are various options of light source available to enable a suitable balance between efficiency and lighting effect.
Cornice mounting fluorescent range of shallow vandal resistant luminaires designed for commercial, hospital, and educational environments. The luminaire uses T5 high efficiency fluorescent tubes with high frequency electronic control gear. The combination of mild steel bodies and frames ensures a tight fit, to help reduce the risk of ligature problems.
The diffuser can be supplied with opal or prismatic 3mm or 5mm thick polycarbonate. The geartray is made of white powder coated mild steel and is removable for ease of maintenance. The screws holding the frame are stainless steel high security Allen type with central pin as standard.

To view the data sheet click here

• Polycarbonate diffuser
• High frequency electronic gear
• Vandal resistant design
• IP54 design
• Excellent photometric performance

These vandal-resistant luminaires are designed for use in areas where resilience is important, such as association and activity areas. There are various options of light source available to enable a suitable balance between efficacy and effect to be achieved.
Surface-mounting fluorescent range of shallow vandal resistant luminaires designed for commercial, prison, and other public environments. The luminaire uses T5 high efficacy fluorescent tubes with high frequency electronic control gear. The combination of mild steel bodies and frames, polycarbonate diffuser, and tamper proof bolts ensures a strong enclosure.
The geartray is made of white powder coated mild steel and is removable for ease of maintenance. The screws holding the frame are stainless steel high security Allen type with central pin as standard.

To view the full data sheet click here