01482 223353 [email protected]
Menu

Latest News

Nov 13
0
Helios Vandal Resistant Lighting

Helios

By | Vandal Resistant Lighting | No Comments

Designed and built for HMP Custodial Establishments

• Indoor IP20 or Outdoor IP65 versions
• Integral Long Life Batteries
• Easy Installation
• Aesthetically Pleasing Profile
• Good Photometric Performance

A stylish range of integral emergency lighting units for wall mounting indoors and outdoors. The luminaire uses two 21W tungsten lamps in spotlight housings.

The body is made from powder coated mild steel for the IP20 version and polycarbonate for the IP65 type. The units are designed to provide required illuminance levels on perimeter escape routes of large open areas in industrial and commercial buildings.

To view the full datasheet click here

Nov 13
0
Halbane IP65 Factory Lighting

Halbane IP65

By | Factory Lighting, Warehouse Lighting | No Comments

• Thermal Resistant gearbox
• High Purity Aluminium Reflector
• Removable Geartray
• Thermal Safety Cutout in ballast
• Excellent Photometric performance

A range of high quality industrial luminaires for mounting heights in excess of 5m. The gearbox body is manufactured from thermal resistant nylon and the reflector is made from spun aluminium.

Although the luminaires are designed for use in industrial situations they are of pleasing aesthetic appearance, enabling them to be located in other areas. There are various options of light source available to enable a suitable balance between efficacy and effect to be achieved.

To view the full datasheet click here

Nov 13
0
Galloway Custodial Lighting

Galloway

By | Vandal Resistant Lighting | No Comments

Designed and built for HMP Custodial Establishments

• Polycarbonate body
• High Purity Aluminium Reflector
• Removable geartray
• Good sideways distribution to maximise spacing
• Excellent Photometric performance

A range of wall mounted fittings for mounting heights in the order of 2 – 6m. The luminaire is manufactured from polycarbonate and is vandal resistant.

The reflector is made from anodised and brightened 99.85 aluminium. The wall packs are designed for use in amenity and security conscious areas where discretion and strength are important. There are various options of light source available to enable a suitable balance between efficacy and effect to be achieved. The fittings give good sideways distribution to obtain maximum spacing.

To view the full datasheet click here

Nov 13
0
Galena Factory Lighting

Galena

By | Vandal Resistant Lighting | No Comments

Designed and built for HMP Custodial Establishments

• T5 lamp technology means high efficacy
• HF Electronic Control Gear
• Easy Installation

An attractive range of modular fluorescent IP65 fittings for general use. The luminaire uses T5 high efficacy lamps with high frequency electronic control gear.
The body is made from white powder coated mild steel with welded steel joints. They are suitable for use in many commercial applications, such as public areas and wet production areas.

The range is particularly used in areas where fittings are likely to undergo mild attacks from vandals. There are various sizes and lamp options available to suit the particular application.

To view full datasheet click here

Nov 13
0
Fresco Office Lighting

Fresco

By | Office Lighting | No Comments

• Low Glare Polycarbonate Controller
• High Frequency Electronic gear
• Vandal Resistant Design
• Secure Endcaps
• Excellent Photometric performance

Surface fluorescent range of very shallow vandal resistant luminaires designed for commercial, hospital and educational environments. The luminaire uses T5 high efficiency fluorescent tubes with high frequency electronic control gear.

The combination of prisms and reeding on the controller gives a soft light distribution and as it is made from polycarbonate it is very resilient against mis-use. The endcaps can be supplied with tamper resistant screws to increase resistance to vandalism.

The shallow white powder coated steel geartray keeps the luminaire depth to an absolute minimum. The luminaires are designed for use in those areas where aesthetic appearance is important and there are various options of light source available to enable a suitable balance between efficacy and effect to be achieved.

The full datasheet can be viewed here

Nov 13
0
FossaIP65 Retail Lighting

Fossa IP65

By | Retail Lighting | No Comments

• User friendly design
• Modern Energy Saving lamps
• Easy maintenance
• Excellent Photometric performance

A useful range of recessed ceiling mounting downlight fittings. The luminaire comes with integral gearbox and uses compact fluorescent lamps. The protective polycarbonate diffuser is housed in a fully sealed and gasketted frame, to give the luminaire IP65 protection.

The range is also available with maintained remote emergency and digital dimming options. The units are designed to provide the required lighting levels in exterior applications such as arcades, entrances, and overhangs of most industrial, educational, medical and commercial buildings.

To view the full datasheet click here

Nov 13
0
Fossa Retail Lighting

Fossa

By | Retail Lighting | No Comments

• User friendly design
• Modern Energy Saving lamps
• Easy maintenance
• Excellent Photometric performance
• Integral gear box
• Also available in LED

A modern range of recessed ceiling mounting downlight fittings. The luminaire comes with integral gearbox and uses compact fluorescent lamps. The reflector is made from facetted aluminium and has been designed with the best photometrics in mind.

The range is also available with maintained remote emergency and digital dimming options.

The units are designed to provide required illuminance levels as well as an attractive appearance in most residential and commercial buildings. For any advice regarding the technical aspects of these products please consult our Technical Department.

To view the full datasheet click here

Nov 13
0
Elixir Office Lighting

Elixir

By | Office Lighting | No Comments

• Compact lamp technology means good efficacy
• HF Electronic control gear
• Easy Installation
• Extremely low profile
• Coloured body Options

A range of wall mounted uplights for many applications. The body is made from white powder coated mild steel and the downward VDU louvre is made from aluminium.

There are various lamp options, together with choice of body finish and size, to enable applications to be illuminated easily and aesthetically pleasing.

The luminaires are useful to assist in obtaining necessary wall and ceiling illuminance ratios in VDU applications.

To view the full datasheet click here

Nov 13
0

Diamond Angle

By | Vandal Resistant Lighting | No Comments

• Polycarbonate diffuser
• High Frequency Electronic gear
• Vandal Resistant Design
• IP54 enclosure
• Excellent Photometric performance

Cornice mounting fluorescent range of shallow vandal resistant luminaires designed for commercial, prison, and other public environments. The luminaire uses T5 high efficacy fluorescent tubes with high frequency electronic control gear.

The combination of mild steel bodies and frames, polycarbonate diffuser and tamper proof bolts ensures a strong enclosure. The geartray is made of white powder coated mild steel and is removable for ease of maintenance. The screws holding the frame are stainless steel high security Allen type with central pin as standard.

The luminaires are designed for use in those areas where resilience is important such as association and activity areas, and there are various options of light source available to enable a suitable balance between efficacy and effect to be achieved.

To view the full data sheet here

Nov 13
0
Cardinal Office Lighting

Cardinal

By | Office Lighting | No Comments

• Low Glare Gull-Wing Reflector
• High Frequency Electronic gear
• Pleasing Soft Light Effect
• Easy Lamp Replacement
• Excellent Photometric performance

Recessed fluorescent modular range of decorative luminaires designed for commercial environments.

The luminaire uses compact lamps with high frequency electronic control gear. The gull-wing reflector gives a soft light distribution and is made from shaped powder coated mild steel, whilst the central perforated cylinder hides the lamps from direct view.

The luminaires are designed for use in those areas where aesthetic appearance is important, and there are various options of light source available to enable a suitable balance between efficacy and effect to be achieved.

To view the full data sheet click here.

Get in touch today to dicuss your lighting requirements further Contact Us